A question on OSPF for NBMA Networks

From: Scot Peter (scotsman@rediffmail.com)
Date: Thu Mar 06 2003 - 13:38:34 GMT-3

Hi Group,

If we need to configure OSPF on a Multipoint interface with the
following condition,
- R1 should use Multipoint interfaces,
- R2, R3 should not use subinterfaces,
- All three routers should be in the same Network.
- Don't configure Network type Broadcast or non-broadcast.

    R1
   / \
R2 R3

I am not sure about configuring "ip ospf network
point-to-multipoint" (as it is mentioned not to configure
non-broadcast) or do we need to configure using "neighbor"
command? Please advice me on this.

Thanks
Peter

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:33 GMT-3