Virtual-link

From: Ciscolab (ciscolab@vip.sina.com)
Date: Tue Mar 04 2003 - 23:34:03 GMT-3

Next message: Henry Jiang: "Re: Dialer watch - BRI interface won't go down when primary is"
Previous message: soon ccie: "Multicast Route Filtering"
Next in thread: SJ Kirk: "RE: Virtual-link"
Maybe reply: SJ Kirk: "RE: Virtual-link"
Maybe reply: Brian Dennis: "RE: Virtual-link"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello, All,

The following is the output of "show ip ospf virtual-link", I didn't passive
the interface Serial 0, but why the message show interface passived? thanks
for you all help in advance.

  Virtual Link OSPF_VL4 to router 222.22.1.5 is up
  Run as demand circuit
  DoNotAge LSA allowed.
  Transit area 5, via interface Serial0, Cost of using 64
  Transmit Delay is 1 sec, State POINT_TO_POINT,
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5

No Hellos (Passive interface)

Adjacency State INIT (Hello suppressed)

    Index 0/0, retransmission queue length 0, number of retransmission 0
    First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
    Last retransmission scan length is 0, maximum is 0
    Last retransmission scan time is 0 msec, maximum is 0 msec

!!Ciscolab
!!Ciscolab@vip.sina.com
!!2003-03-05

Next message: Henry Jiang: "Re: Dialer watch - BRI interface won't go down when primary is"
Previous message: soon ccie: "Multicast Route Filtering"
Next in thread: SJ Kirk: "RE: Virtual-link"
Maybe reply: SJ Kirk: "RE: Virtual-link"
Maybe reply: Brian Dennis: "RE: Virtual-link"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:32 GMT-3