From: Brian Dennis (brian@labforge.com)
Date: Tue Feb 25 2003 - 23:49:28 GMT-3
QoS groups are internal to the router and the packet header isn't
altered so this makes QoS groups good to use when you don't want to
change the existing IP precedence or DSCP value that may already set.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ram Shummoogum
Sent: Tuesday, February 25, 2003 5:40 PM
To: ccielab@groupstudy.com
Subject: QoS Groups
Interface ser0/0
rate-limit access-group 1 input 45000000 22500 22500 conform-action
set-qos-transmit 3 exceed-action drop
rate-limit input 45000000 22500 22500 conform-action set-qos-transmit 0
exceed-action drop
"QoS groups which range from 0 to 99 is local to the router and is not
transmitted in the IP Header."
My question is how are the QoS groups used.
Why do I have to set it, if no other router can receive it.
I could have simply use set-prec-transmit with the same effect.
Sorry if the question appears simple to some.
regards,
RAM
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:35 GMT-3