QoS Groups

From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Tue Feb 25 2003 - 22:39:56 GMT-3

• Next message: Chuck Church: "Re: Does anyone know if this is possible?"
• Previous message: tan: "RE: BGP Route Reflector"
• Next in thread: Brian Dennis: "RE: QoS Groups"
• Maybe reply: Brian Dennis: "RE: QoS Groups"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Interface ser0/0
rate-limit access-group 1 input 45000000 22500 22500 conform-action
set-qos-transmit 3 exceed-action drop
rate-limit input 45000000 22500 22500 conform-action set-qos-transmit 0
exceed-action drop

"QoS groups which range from 0 to 99 is local to the router and is not
transmitted in the IP Header."

My question is how are the QoS groups used.
Why do I have to set it, if no other router can receive it.
I could have simply use set-prec-transmit with the same effect.

Sorry if the question appears simple to some.

regards,
RAM

• Next message: Chuck Church: "Re: Does anyone know if this is possible?"
• Previous message: tan: "RE: BGP Route Reflector"
• Next in thread: Brian Dennis: "RE: QoS Groups"
• Maybe reply: Brian Dennis: "RE: QoS Groups"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:35 GMT-3