From: Jay Hennigan (jay@west.net)
Date: Sun Feb 23 2003 - 23:04:43 GMT-3
On Sun, 23 Feb 2003, Alsontra Daniels wrote:
> After checking the configs, I am sure that all configs are correct, but dlci
> remains inactive. dlci 120 is inactive on the adjacent switch as well. Have
> I missed a curial gotcha?
>
> (output of sh frame pvc for dlci 120)
>
> DLCI = 120, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0.1
>
> input pkts 0 output pkts 3 in bytes 0
> out bytes 141 dropped pkts 0 in FECN pkts 0
> in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 3 out bcast bytes 141
> pvc create time 00:18:25, last time pvc status changed 00:15:20
>
> (Output of sh frame pvc on the adjacent switch)
>
> DLCI = 120, DLCI USAGE = SWITCHED, PVC STATUS = INACTIVE, INTERFACE =
> Serial0
>
> input pkts 13 output pkts 0 in bytes 643
> out bytes 0 (WHY)--> dropped pkts 179 in FECN pkts 0
> in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 0 out bcast bytes 0
> pvc create time 01:33:28, last time pvc status changed 00:51:44
> Num Pkts Switched 4
Show us the config of the frame switch and the router on the other side
of the PVC.
It looks like layer 1 or 2.
-- Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net NetLojix Communications, Inc. - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:32 GMT-3