From: Ryan B (ryanb@pobox.com)
Date: Thu Feb 20 2003 - 17:41:25 GMT-3
I'm not sure what version IOS this started with, but you can show individual
interfaces...
eg: sh run int hssi2/0
----- Original Message -----
From: "Copleston Daniel" <Daniel.Copleston@ukomfs.com>
To: "'Casey, Paul (6822)'" <Paul.Casey@o2.com>; <ccielab@groupstudy.com>
Sent: Thursday, February 20, 2003 5:08 AM
Subject: RE: Can you have OSPF without area 0 at all?
> Depending on the IOS version you are using you will have a range of
options
> available after the | command (from simple string matching to full regexp
> support). I find using the following helpful:
> sh run | begin router ospf
>
> This will also show all config after router ospf but it saves you
scrolling
> through the top parts of the config and you can always ctrl-c out of the
> rest anyway.
>
> Thanks,
> Daniel
>
> -----Original Message-----
> From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
> Sent: 20 February 2003 11:14
> To: 'ccielab@groupstudy.com'
> Subject: RE: Can you have OSPF without area 0 at all?
>
>
> Hello,
>
> It is possible to show part of a routers running configuration
> Say you have a really long config, and you only want to look at the ospf
> section under router ospf or you only want to look at the BGP
section..etc.
> on the router without having to scroll through the whole config,
>
> Can this be done,
>
> Kind regards.
> Paul.
>
>
>
****************************************************************************
> ************
>
> This E-mail is from O2. The E-mail and any files
> transmitted with it are confidential and may also be privileged and
intended
> solely for the use of the individual or entity to whom they are addressed.
> Any unauthorised direct or indirect dissemination, distribution or copying
> of this message and any attachments is strictly prohibited. If you have
> received the E-mail in error please notify postmaster@O2.com or
> telephone ++ 353 1 6095000.
>
>
****************************************************************************
> *************
>
>
> ************************************************************************
> The contents of this message and any attachments are confidential and
> are intended solely for the attention and use of the addressee only.
> Information contained in this message may be subject to legal,
> professional or other privilege or may otherwise be protected by other
> legal rules. This message should not be copied or forwarded to any other
> person without the express permission of the sender. If you are not the
> intended recipient you are not authorised to disclose, copy, distribute
> or retain this message or any part of it.
>
> If you have received this message in error, please notify the sender by
> telephone (+44-20-7002-4000) and destroy the original message.
>
> We reserve the right to monitor all e-mail messages passing through our
> network.
> ************************************************************************
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:31 GMT-3