From: Chris Johnston (chris@routerguy.com)
Date: Thu Feb 20 2003 - 18:20:39 GMT-3
Hello everyone.
I have a 2610 with WIC-1B-U and a 1750 with WIC-1B-U. I configured them
pretty much identically.
If they are configured in legacy DDR mode, the 1750 can call (via ping
to remote IP) to the 2610 successfully 100% of the time. OK, that test
is good. The 2610 on the other hand will simply bring up the interface,
get through the authentication but never pass L3 (IP) traffic. No
pings. I can see that PPP IPCP and CDPCP are up and running so this
means I got through the PPP negotiation.
But if the connection is initiated by the 1750 I can ping both ways all
day long.
But what really bugs the daylights out of me is if I convert to dialer
profiles (dialer pool-member) it works 100% in both directions. Does
anyone have any ideas as to why this may be happening?
Here are the snippets from both routers. They really are mirror images
This is the 1750:
interface BRI0
ip address 10.168.20.246 255.255.255.252
encapsulation ppp
dialer map ip 10.168.20.245 name R2-TermServ broadcast 8358661
dialer map ip 10.168.20.245 name R2-TermServ broadcast 8358662
dialer load-threshold 50 either
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866201 8358662
isdn spid2 0835866401 8358664
ppp authentication chap
ppp multilink
!
access-list 100 deny udp any any eq rip
access-list 100 deny eigrp any any
access-list 100 deny ospf any any
access-list 100 deny ip 224.0.0.0 1.255.255.255 any
access-list 100 permit ip any any
dialer-list 1 protocol ip list 100
This is the 2610
interface BRI0/0
ip address 10.168.20.245 255.255.255.252
encapsulation ppp
dialer map ip 10.168.20.246 name R8 broadcast 8358662
dialer map ip 10.168.20.246 name R8 broadcast 8358664
dialer load-threshold 50 either
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
ppp authentication chap
ppp multilink
!
access-list 100 deny udp any any eq rip
access-list 100 deny eigrp any any
access-list 100 deny ospf any any
access-list 100 deny ip 224.0.0.0 1.255.255.255 any
access-list 100 permit ip any any
dialer-list 1 protocol ip list 100
Chris Johnston <chris@routerguy.com>
714-306-5746
949-653-8819 (fax)
So tell me again. How do I set my laser printer to stun?
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:31 GMT-3