From: balaji.balakrishnan (balaji.balakrishnan@swift.com)
Date: Thu Feb 20 2003 - 20:04:27 GMT-3
Do you know that with latest IOS versions, you can perform " show run" from any prompt and perform other "show" commands by
adding "do" before that command like "do sh ip route".
Rgds
Bala.
Ryan B wrote:
> I'm not sure what version IOS this started with, but you can show individual
> interfaces...
>
> eg: sh run int hssi2/0
>
> ----- Original Message -----
> From: "Copleston Daniel" <Daniel.Copleston@ukomfs.com>
> To: "'Casey, Paul (6822)'" <Paul.Casey@o2.com>; <ccielab@groupstudy.com>
> Sent: Thursday, February 20, 2003 5:08 AM
> Subject: RE: Can you have OSPF without area 0 at all?
>
> > Depending on the IOS version you are using you will have a range of
> options
> > available after the | command (from simple string matching to full regexp
> > support). I find using the following helpful:
> > sh run | begin router ospf
> >
> > This will also show all config after router ospf but it saves you
> scrolling
> > through the top parts of the config and you can always ctrl-c out of the
> > rest anyway.
> >
> > Thanks,
> > Daniel
> >
> > -----Original Message-----
> > From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
> > Sent: 20 February 2003 11:14
> > To: 'ccielab@groupstudy.com'
> > Subject: RE: Can you have OSPF without area 0 at all?
> >
> >
> > Hello,
> >
> > It is possible to show part of a routers running configuration
> > Say you have a really long config, and you only want to look at the ospf
> > section under router ospf or you only want to look at the BGP
> section..etc.
> > on the router without having to scroll through the whole config,
> >
> > Can this be done,
> >
> > Kind regards.
> > Paul.
> >
> >
> >
> ****************************************************************************
> > ************
> >
> > This E-mail is from O2. The E-mail and any files
> > transmitted with it are confidential and may also be privileged and
> intended
> > solely for the use of the individual or entity to whom they are addressed.
> > Any unauthorised direct or indirect dissemination, distribution or copying
> > of this message and any attachments is strictly prohibited. If you have
> > received the E-mail in error please notify postmaster@O2.com or
> > telephone ++ 353 1 6095000.
> >
> >
> ****************************************************************************
> > *************
> >
> >
> > ************************************************************************
> > The contents of this message and any attachments are confidential and
> > are intended solely for the attention and use of the addressee only.
> > Information contained in this message may be subject to legal,
> > professional or other privilege or may otherwise be protected by other
> > legal rules. This message should not be copied or forwarded to any other
> > person without the express permission of the sender. If you are not the
> > intended recipient you are not authorised to disclose, copy, distribute
> > or retain this message or any part of it.
> >
> > If you have received this message in error, please notify the sender by
> > telephone (+44-20-7002-4000) and destroy the original message.
> >
> > We reserve the right to monitor all e-mail messages passing through our
> > network.
> > ************************************************************************
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:31 GMT-3