From: Jerry (phase90@comcast.net)
Date: Sun Feb 23 2003 - 10:26:38 GMT-3
From what I gather the IOS images run on ATM hardware do not support
ilmi-keepalives. It may
have changed. So, on an older IOS image in a Lightstream 1010, even if you
"enable" them with the
ilmi keepalive command, there are no keepalives sent on your physical media.
As I said this could be
different now.
Jerry
----- Original Message -----
From: Bobby <bobby1@ctimail3.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 23, 2003 3:25 AM
Subject: Reg: ATM
> Hi Friends,
>
>
> The following command is off by default on atm interface :.
> " no atm ilmi-keepalive"
> So just want to check with u guys shall I turned it on or leave
> it as it is in the real lab.
>
> Thanks
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:29 GMT-3