From: Khalid A. Kaseb (khalid_ameen@rayaintegration.com)
Date: Sun Feb 16 2003 - 05:28:43 GMT-3
You still missing the vlan access-map command to apply the action which
is drop, review the email from Kym Blair he provided the correct
solution as I think
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Pang Gery
Sent: Sunday, February 16, 2003 5:32 AM
To: ccielab@groupstudy.com
Subject: RE: mac address access-lists
Hi Group,
Am I right to use the config as below?
vlan filter v15mac-list vlan-list 15
mac access-list extended v15mac-list
deny 0505.0500.0000 0000.00ff.ffff any
permit any any
Any other concern I should think of?
Thank you very much.
Gery
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
eric
Sent: Saturday, February 15, 2003 1:59 PM
To: Ccielab
Subject: mac address access-lists
Hey guys,
Here is requirement, unfortunatley the answer confuses me more than
helps.
any input would be appreciated.
"Configure cat1 to deny mac address whose first 3 bytes are 050505 to
send
any frames to any host on vlan 15 "
Now the first part I can figure out its the second part that about
sending
frames to any host on a particular vlan thats got me.
How is this done ?
Regards,
~eric
Yahoo! =l)G/d(%+H=c .I$U<i,y$h&V
http://voicemail.yahoo.com.hk
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:25 GMT-3