From: Ansar Mohideen (ansar@garmco.com)
Date: Sun Feb 16 2003 - 09:37:15 GMT-3
Just type Ctrl + v. it will give the ? For the wildcard rather than getting
help for pressing the ? Mark
Rgds.
-----Original Message-----
From: Dang Quang Minh [mailto:minhdq@saigonctt.com]
Sent: Saturday, February 15, 2003 2:29 PM
To: 'freewilly free'
Cc: 'Sage Vadi'; ccielab@groupstudy.com
Subject: RE: RE: DLSW: netbios host wildcard
Use Ctrl-V before ? mark.
Thank you
-----Original Message-----
From: freewilly free [mailto:freewilly2002@rediffmail.com]
Sent: Saturday, February 15, 2003 5:11 PM
To: Dang Quang Minh
Cc: 'Sage Vadi'; ccielab@groupstudy.com
Subject: Re: RE: DLSW: netbios host wildcard
HI ,
Can you please let me know how to type ? charecter in the below
mentioned access-list.
On Sat, 15 Feb 2003 Dang Quang Minh wrote :
>Hi,
>
>Try this:
>
>Netbios access-list host mylist permit TW?9
>Dlsw remote-peer 0 tcp 172.16.64.2 host-netbios-out mylist
>
>thanks
>
>
>-----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>Behalf Of
>Sage Vadi
>Sent: Saturday, February 15, 2003 2:46 PM
>To: ccielab@groupstudy.com
>Subject: DLSW: netbios host wildcard
>
>All,
>
>Q) Set a filter on R1 so only NETBIOS hosts that have:
>the first two characters "TW", the third character can
>be anything, but the fourth character is "9". These
>hosts will be permitted between R1 and R2.
>
>A) dlsw icanreach netbios-name TW*9
>
>- but how do I apply this between R1 and R2? That is
>the question...
>
>I tried using netbios acl, but I don't think that
>would work. Any suggestion?
>
>Cheers!
>Sage
>
>
>
>__________________________________________________
>Do You Yahoo!?
>Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts http://uk.my.yahoo.com
-----------------------------------------------------------------------
This e-mail message and any files transmitted with it are confidential
and are intended solely for the use of the individual or entity to whom
they are addressed. If you are not the intended recipient, or the
person responsible for delivering the e-mail to the intended recipient
be advised that you have received this e-mail in error and that any
use, dissemination, forwarding, printing, or copying of this e-mail is
strictly prohibited If you have received an e-mail in error, please
immediately notify your direct supervisor or contact GARMCO IT Helpdesk
on (973)-734664, email IThelp@garmco.com.
Thank you very much for your co-operation.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:25 GMT-3