From: Joe Chang (changjoe@earthlink.net)
Date: Sun Feb 16 2003 - 01:04:11 GMT-3
----- Original Message -----
From: <rionaldi@cbn.net.id>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 15, 2003 9:40 PM
Subject: CBWFQ
> Dear All,
>
> I still confuse with the CBWFQ bandiwidth allocation....
>
> If I specify let say bandiwidh percentage 50% under certain class... does
it
> mean the class only have 37.5% bandiwidth allocation (50% X 75% default
max
> reserved bandwidth)?
>
That class gets a guaranteed 50% of the bandwidth under conditions of
congestion. I think the configured bandwidth percentages are additive
towards the 75% maximum.
> And then let say I have serial let say with 1 Mbps capacity.... does it
means
> that I only can use 750 kbps of it bandwidth.. what happen when the total
> bandwidth I used is more than 750kbps by default ? I is resulting any
error?
>
> Regards,
> Prio
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:24 GMT-3