From: Gery Pang (pang_gery@yahoo.com.hk)
Date: Sun Feb 16 2003 - 01:05:31 GMT-3
Hi Prio,
Please correct me if I am wrong.
I think you know the command max-reserved-bandwidth percent that is to control
the max. reservable bandwidth.
The bandwidth available is the link's bandwidth minus the bandwidth allocated
to LLQ and (frame-relay) ip rtp priority .... commands.
I remember that if I reserve more than 75% without the command, I get an error
message.
Thank you.
Gery
Dear All,
I still confuse with the CBWFQ bandiwidth allocation....
If I specify let say bandiwidh percentage 50% under certain class... does it
mean the class only have 37.5% bandiwidth allocation (50% X 75% default max
reserved bandwidth)?
And then let say I have serial let say with 1 Mbps capacity.... does it means
that I only can use 750 kbps of it bandwidth.. what happen when the total
bandwidth I used is more than 750kbps by default ? I is resulting any error?
Regards,
Prio
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:24 GMT-3