From: Georg Pauwen (pauwen@hotmail.com)
Date: Thu Feb 13 2003 - 16:18:47 GMT-3
Hello colleagues,
I have a Catalyst 6509 running CatOS, and when I type 4sess 154in order to
access the MSFC, I get a 4Module 15 not installed4 message. When I type
4switch console4 I can access the MSFC but it is in ROMMON mode.
When I type 4dir bootflash4 from the ROMMON prompt, I can see that there is
only a C6MSFC2-boot file. I know that I need to have e.g. a
c6msfc2-jo3sv-mz.121-13.E4 image in bootflash in order for the MSFC to work.
But how do I get the image into bootflash ? I tried to TFTP it into
bootflash from the CatOS command prompt, but I don4t see it in the bootflash
directory accessible from the ROMMON prompt of the MSFC after that.
I basically need an instruction on how to get a 6509 with a Supervisor II
and an MSFC to work. I checked the Cisco website but could only find to
change back from Native to Hybrid. Does anybody have an idea or a good link
?
Thanks for your help in advance.
Regards,
Georg
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:21 GMT-3