From: Franck ccie (cciefrank@hotmail.com)
Date: Thu Feb 13 2003 - 16:03:12 GMT-3
Hi all.
I am looking for informations comparing Cisco NAS ( AS5400, AS5300) and
Lucent NAS ( APX1000, MAXTNT).
Is somebody have an experience with Lucent NAS ? What do you think about
Lucent NAS comparing to Cisco NAS ....
Thank for your helps .
Frank.
>From: Sam.MicroGate@usa.telekom.de >Reply-To:
Sam.MicroGate@usa.telekom.de >To: FAliu@iteco.com, ccielab@groupstudy.com
>Subject: RE: Auto install >Date: Thu, 13 Feb 2003 12:24:56 -0500 >
>Folorunso, > >Can you please copy and paste your config.... > >Sam > > >
>-----Original Message----- >From: FAliu@iteco.com
[mailto:FAliu@iteco.com] >Sent: Thursday, February 13, 2003 11:40 AM >To:
ccielab@groupstudy.com >Subject: Auto install > > >Hi Guys, > >I tried
doing autoinstall over frame relay . I specified the host specific >file
in my tftp server (g9r6-confg) and also the ip host name ip-address in
>the network-confg file (both in my tftp server). Appropriate config was
>placed in the forwarding router staging router as cisco called it) but
each >time the new router boots, it gives a DNS-Termination error and
goes on to >load network-confg, router-confg and cisconet-confg and after
all that, it >picks only the IP address and frame-relay encapsulation and
does not pick >other config . Can you enlighten me on what I could be
doing wrong? > >rgds, >Folorunso >.
>__________________________________________________________________ >To
unsubscribe from the CCIELAB list, send a message to
>majordomo@groupstudy.com with the body containing: >unsubscribe ccielab
------------------------------------------------------------------------
MSN Search, le moteur de recherche qui pense comme vous ! Cliquez-ici
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:21 GMT-3