From: Chuck Church (ccie8776@rochester.rr.com)
Date: Thu Feb 13 2003 - 17:31:30 GMT-3
http://www.cisco.com/warp/public/473/14.shtml
Chuck Church
CCIE #8776, MCNE, MCSE
----- Original Message -----
From: "Georg Pauwen" <pauwen@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, February 13, 2003 2:18 PM
Subject: Catalyst 6509 Module 15 not installed
> Hello colleagues,
>
> I have a Catalyst 6509 running CatOS, and when I type 4sess 154in order to
> access the MSFC, I get a 4Module 15 not installed4 message. When I type
> 4switch console4 I can access the MSFC but it is in ROMMON mode.
> When I type 4dir bootflash4 from the ROMMON prompt, I can see that there
is
> only a C6MSFC2-boot file. I know that I need to have e.g. a
> c6msfc2-jo3sv-mz.121-13.E4 image in bootflash in order for the MSFC to
work.
> But how do I get the image into bootflash ? I tried to TFTP it into
> bootflash from the CatOS command prompt, but I don4t see it in the
bootflash
> directory accessible from the ROMMON prompt of the MSFC after that.
> I basically need an instruction on how to get a 6509 with a Supervisor II
> and an MSFC to work. I checked the Cisco website but could only find to
> change back from Native to Hybrid. Does anybody have an idea or a good
link
> ?
> Thanks for your help in advance.
>
> Regards,
>
> Georg
>
>
>
>
>
>
> _________________________________________________________________
> MSN Search, le moteur de recherche qui pense comme vous !
> http://search.msn.fr/worldwide.asp
> .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:21 GMT-3