From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Thu Feb 06 2003 - 16:12:49 GMT-3
Sunil
I believe you can use tags when doing mutual distribution between OSPF and
another protocol.
When redistributing into OSPF assign a tag value for the redistributed
network(s).
When redistrinuting OSPF into the other protocol, write and apply a
route-map denying any route from OSPF that has that tag value.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Sunil Soporie
Sent: Thursday, February 06, 2003 10:44 AM
To: ccielab@groupstudy.com
Subject: Redistribution Loop avoiding, best way
Hi Folks,
1)What is the best way to avoid redistribution loops if we are
redistributing
at two points in the network.
2)By just redistributing with metrics, are we good.
3)I have read cisco documentation and seen the usage of Tag parameter when
redistributing into OSPF, how good is that.
Any good links on CCO, will be a great help.
Thanks,
Sunil
.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:12 GMT-3