From: Ronald Fugate (RFugate@amdocs.com)
Date: Thu Jan 16 2003 - 15:29:16 GMT-3
I had this same issue.
I purchased 3 of them a week ago.
When this happened, I pulled to power out for about 5 minutes and it worked.
I couldnt find the ubr924 code on cco, only the ubr925 code.
Are you loading the 925 code or the 924 code?
-----Original Message-----
From: Barry Rowland [mailto:reachbarry@bigfoot.com]
Sent: Thursday, January 16, 2003 12:01 PM
To: ccielab@groupstudy.com
Subject: OT: UBR924 no dial tone.
Sorry for the OT, but I thought maybe someone else out there has run into
this.
I'm using 2 ubr924's, I picked up pretty cheap, to do Voip scenario's on my
home rack. The problem is
after using them for a day and everything worked fine, exept as noted below, I
come in the next morning and cannot get a dial tone for any of the ports on
either unit.
Debug indicates the ports do sense the off hook condition and come up with a
"tone", but you can't hear it on any of the phones. I have tried reboots, both
warm and power cycle, but still no dial tone. This is really strange, as the
same configs where working fine yesterday. I did have this problem with one of
the routers yesterday morning but after a few power cycles the ports came up!
I will be loading
a 12.2 Enterprise image this evening to see if this helps.
Thanks for any ideas!
Barry
.
-------------------------------------------------------------------------------------
The information contained in this message is proprietary of Amdocs,
protected from disclosure, and may be privileged.
The information is intended to be conveyed only to the designated recipient(s)
of the message. If the reader of this message is not the intended recipient,
you are hereby notified that any dissemination, use, distribution or copying of
this communication is strictly prohibited and may be unlawful.
If you have received this communication in error, please notify us immediately
by replying to the message and deleting it from your computer.
Thank you.
-------------------------------------------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:51 GMT-3