From: Ronald Fugate (RFugate@amdocs.com)
Date: Thu Jan 16 2003 - 17:21:52 GMT-3
Same here.
But I will add it as well.
-----Original Message-----
From: Barry Rowland [mailto:reachbarry@bigfoot.com]
Sent: Thursday, January 16, 2003 2:01 PM
To: Brent Colwell; ccielab@groupstudy.com
Subject: Re: UBR924 no dial tone.
Yes, that works. But one of the routers has a dial tone without this
command, and yesterday
I went all day without this command on either router and had no issues.
Don't know why.
Thanks,
Barry
----- Original Message -----
From: "Brent Colwell" <bcolwell@bellind.com>
To: "Barry Rowland" <reachbarry@bigfoot.com>; <ccielab@groupstudy.com>
Sent: Thursday, January 16, 2003 1:59 PM
Subject: RE: UBR924 no dial tone.
> Barry, you have to put the command "cable-modem voip clock-internal" on
the cable 0 interface to get dial-tone. This link explains why.
>
>
http://www.cisco.com/en/US/products/hw/cable/ps2221/products_qanda_item09186
a008009441f.shtml#no_dial_tone
>
> Brent
>
> -----Original Message-----
> From: Barry Rowland [mailto:reachbarry@bigfoot.com]
> Sent: Thu 1/16/2003 1:00 PM
> To: ccielab@groupstudy.com
> Cc:
> Subject: OT: UBR924 no dial tone.
>
>
>
> Sorry for the OT, but I thought maybe someone else out there has run into
> this.
>
> I'm using 2 ubr924's, I picked up pretty cheap, to do Voip scenario's on
my
> home rack. The problem is
> after using them for a day and everything worked fine, exept as noted
below, I
> come in the next morning and cannot get a dial tone for any of the ports
on
> either unit.
>
> Debug indicates the ports do sense the off hook condition and come up with
a
> "tone", but you can't hear it on any of the phones. I have tried reboots,
both
> warm and power cycle, but still no dial tone. This is really strange, as
the
> same configs where working fine yesterday. I did have this problem with
one of
> the routers yesterday morning but after a few power cycles the ports came
up!
> I will be loading
> a 12.2 Enterprise image this evening to see if this helps.
>
>
> Thanks for any ideas!
>
> Barry
> .
> .
.
-------------------------------------------------------------------------------------
The information contained in this message is proprietary of Amdocs,
protected from disclosure, and may be privileged.
The information is intended to be conveyed only to the designated recipient(s)
of the message. If the reader of this message is not the intended recipient,
you are hereby notified that any dissemination, use, distribution or copying of
this communication is strictly prohibited and may be unlawful.
If you have received this communication in error, please notify us immediately
by replying to the message and deleting it from your computer.
Thank you.
-------------------------------------------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:51 GMT-3