From: Larson, Chris (CLarson@usaid.gov)
Date: Wed Jan 15 2003 - 12:01:09 GMT-3
I do not know how to do it with distribute lists, but I thought in the newer
IOS with rip version 2 it was an interface command like EIGRP's
summarization command.
> -----Original Message-----
> From: Eric Foster [SMTP:erfoster@cisco.com]
> Sent: Wednesday, January 15, 2003 1:01 AM
> To: ccielab@groupstudy.com
> Subject: RIP summarization with distribute lists
>
> Hi all,
>
> I have tried to summarize an internal network peered to a backbone router
> with with distribute lists.
>
> For example,
>
> R4(config)#router rip
> R4(config-router)#version 2
> R4(config-router)#redistribute eigrp 5 metric 1
> R4(config-router)#network 150.100.0.0
> R4(config-router)#distribute-list 20 out Ethernet0
> R4(config-router)#distribute-list 10 in Ethernet0
> R4(config-router)#no auto-summary
>
> R4(config)#access-list 10 permit 194.5.0.0 0.0.254.255 log
> R4(config)#access-list 20 permit 172.16.0.0 0.0.0.0 log
>
> *** The networks in eigrp are 172.16.1 thru 16.0/24 ***
>
> I am trying to only advertise the summarized route to the backbone (/16).
>
> I can make this work when the interface to the backbone is configured with
> "R4(config-if)#ip rip send version 1"
>
>
> Any idea on how to make this work with V2 only?
>
> TIA
> --------------------------------------------
> Eric Foster
> Systems Engineer - LA Named Accounts
> Cisco Systems, Inc.
> Office 310-231-4996
> Fax 310-231-4999
> Pager 800-365-4578
> Email erfoster@cisco.com
> --------------------------------------------
> "Empowering the Internet Generation"
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:50 GMT-3