From: Hunt Lee (ciscoforme3@yahoo.com.au)
Date: Sat Jan 04 2003 - 20:47:30 GMT-3
Hello Joe,
There is a good example of DLSW backup peer on Solie p.967.
Hope this is useful =)
Best Regards,
Hunt
--- Joe Martin <jmartin@capitalpremium.net> wrote: > I just need someone to verify
my understanding of the purpose of the
> DLSW Backup Peer.
>
> Initially, I thought that it was used to provide a backup peer for a
> given network. If this were the case, then the primary and backup peers
> would have to always be connected to the same LAN where the end stations
> reside.
>
> I quickly realized that there are several examples on CCO and in my
> reading materials that show the primary and backup peers clearly not
> connected to the same network.
>
> So, I must assume that the primary and backup peers do not need to be
> connected to the same LAN, but simply have the same reachability. That
> is to say they must have the same, or similar, remote peer statements.
> It does me no good to configure a backup if that backup cannot provide
> connectivity to the same end stations provided by the primary peer.
>
> Can someone verify or correct me if I am wrong?
>
> Thanks,
>
> Joe Martin
> .
http://movies.yahoo.com.au - Yahoo! Movies
- What's on at your local cinema?
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:41 GMT-3