From: Shadi (ccie@investorsgrp.com)
Date: Fri Jan 03 2003 - 13:34:38 GMT-3
Guys,
I would like to ask about a design related issue,
I have a 2950G-48 switch with two Gigabit fiber uplinks connected to two
different 6509 switches, each uplink is connected to each 6509 switch and
both switches 6509 are connected through Etherchannel 10Gbit. They are
forming a triangle.
I would like to aggregate the bandwidth between the two 2950G-48 Uplinks up
to 2 Gbps. So the switch 2950G-48, is connected to both switches with 2Gbit.
How can I do that? Can Cisco Etherchannel support termination to one chassis
from aside (2950G) and to two different chassis's from another side (2x
6509).
Any Ideas?
Shadi
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:40 GMT-3