From: Evgeny Tantsura (ivgen@castel.nl)
Date: Sun Dec 22 2002 - 17:53:31 GMT-3
You may make the loopback external - redistribution connected or another
OSPF process and then summarize.
> Hello
>
> (RIP ver 1)
> (OSPF Area 0)
> R3 ------- 130.130.10.0/24 ------- R2 ------- 130.130.50.0/24 ------- R1
>
>
> Suppose that R2 has a loopback 130.130.100.1/27 and it is part of OSPF
> area 0. How to redistribute R2 loopback into RIP ver 1?
> ip ospf network point-to-point will not work because the loopback is
> /27. I did it by putting loopback into another area and then
> summarizing 130.130.100.0/24 into area 0. Is there any way to do it
> without creating new area and can I create new area in the exam without
> instructions to do that ?
>
> Abdallah
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:51 GMT-3