From: Larry Letterman (lletterm@cisco.com)
Date: Sat Dec 14 2002 - 02:42:48 GMT-3
At Cisco we configure vlans in the native mode gateways and trunk those
vlans down
to our access switches. We then connect the L3 uplinks to the routed
backbone . Its more
convienient to have one OS to deal with then two......
Larry
LoizosCisco wrote:
>Scott,
>
>I have configured a couple of dozens of 6509 Layer 3
>myself. I have only configured Native mode without any
>vlans. You are right that there is an option to
>configure vlans in Native mode, but I am trying to
>figure out why would you configure vlans in a Native
>mode when it behaves like a router.
>
>Yes you are right about the link. It is for CSM. I
>just found the link and thought is the right one. Must
>search again to find the right link for MSFC.
>
>Thanks
>
>
>--- "R. Scott King" <scking@cisco.com> wrote:
>
>>Why would you think that a 6500 running Native code
>>couldn't configure
>>VLANS? All you have to do is:
>>
>>config t
>>vlan <vlan #>
>>
>>int fa5/32
>>switchport mode access
>>switchport access vlan <vlan #>
>>
>>My client (Sprint Enterprise) has 53 of these in
>>their core, some using
>>Native and others running Hybrid.
>>
>>BTW, the first link you sent is for configuring the
>>Content Switching Module
>>(CSM), not the 6500 in general.
>>
>>
>>R. Scott King
>>Network Consulting Engineer
>>Cisco Systems, Inc.
>>Infrastructure Engineering Services - SP
>>9155 E. Nichols Avenue Suite 400
>>Englewood, CO 80112
>>720.895.6056 (desk)
>>720.244.5879 (cell)
>>
>>
>>
>>-----Original Message-----
>>From: nobody@groupstudy.com
>>[mailto:nobody@groupstudy.com]On Behalf Of
>>LoizosCisco
>>Sent: Friday, December 13, 2002 7:54 PM
>>To: R. Scott King; george gittins;
>>ccielab@groupstudy.com
>>Subject: RE: vlans with the 6509
>>
>>
>>Both Native and Hybrid are running IOS don't they?
>>
>>Native mode is behaving like a router (no vlans).
>>
>>Hybrid mode is behaving both as router and switch
>>and
>>must configure vlans..
>>
>>
>http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration
>
>>_example09186a0080116ff0.shtml
>>
>>
>>6509 command reference:
>>
>>
>http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_refer
>
>>ence_chapter09186a00800fb5d2.html
>>
>>
>>--- "R. Scott King" <scking@cisco.com> wrote:
>>
>>>If your Sup is running IOS, it's Native.
>>>
>>>
>>>R. Scott King
>>>Network Consulting Engineer
>>>Cisco Systems, Inc.
>>>Infrastructure Engineering Services - SP
>>>9155 E. Nichols Avenue Suite 400
>>>Englewood, CO 80112
>>>720.895.6056 (desk)
>>>720.244.5879 (cell)
>>>
>>>
>>>
>>>-----Original Message-----
>>>From: nobody@groupstudy.com
>>>[mailto:nobody@groupstudy.com]On Behalf Of
>>>george gittins
>>>Sent: Friday, December 13, 2002 12:52 PM
>>>To: ccielab@groupstudy.com
>>>Subject: FW: vlans with the 6509
>>>
>>>
>>>How would I know?.hybrid is set based, my 6509 has
>>>also a layer 3 module
>>>built in.
>>>
>>>George Gittins
>>>Network and Computer Maintenance Supervisor
>>>
>>>-----Original Message-----
>>>From: nobody@groupstudy.com
>>>[mailto:nobody@groupstudy.com] On Behalf Of R.
>>>Scott King
>>>Sent: Friday, December 13, 2002 12:32 PM
>>>To: george gittins
>>>Cc: ccielab@groupstudy.com
>>>Subject: RE: vlans with the 6509
>>>
>>>Is your 6500 running Native or Hybrid code?
>>>
>>>
>>>R. Scott King
>>>Network Consulting Engineer
>>>Cisco Systems, Inc.
>>>Infrastructure Engineering Services - SP
>>>9155 E. Nichols Avenue Suite 400
>>>Englewood, CO 80112
>>>720.895.6056 (desk)
>>>720.244.5879 (cell)
>>>
>>>
>>>
>>>-----Original Message-----
>>>From: nobody@groupstudy.com
>>>[mailto:nobody@groupstudy.com]On Behalf Of
>>>Larry Letterman
>>>Sent: Friday, December 13, 2002 11:10 AM
>>>To: george gittins
>>>Cc: ccielab@groupstudy.com
>>>Subject: Re: vlans with the 6509
>>>
>>>
>>>switch-1(enable) set vlan 10 name myvlan 5/1-48
>>>
>>>the above sets up a vlan with the id number 10,
>>>
>>with
>>
>>>the name myvlan and
>>>puts all the ports in module 5
>>>in that vlan......
>>>
>>>george gittins wrote:
>>>
>>>>Does anyone have an example or a link to
>>>>
>>configure
>>
>>>vlans with the 6500
>>>
>>>>family
>>>>
>>>>
>>>>
>>>>George Gittins
>>>>
>>>>Network and Computer Maintenance Supervisor
>>>>.
>>>>
>>>.
>>>.
>>>.
>>>.
>>>
>__________________________________________________________________
>
>>>To unsubscribe from the CCIELAB list, send a
>>>
>>message
>>
>>>to
>>>majordomo@groupstudy.com with the body containing:
>>>unsubscribe ccielab
>>>
>>
>>__________________________________________________
>>Do you Yahoo!?
>>Yahoo! Mail Plus - Powerful. Affordable. Sign up
>>now.
>>http://mailplus.yahoo.com
>>.
>>
>__________________________________________________________________
>
>>To unsubscribe from the CCIELAB list, send a message
>>to
>>majordomo@groupstudy.com with the body containing:
>>unsubscribe ccielab
>>
>
>
>__________________________________________________
>Do you Yahoo!?
>Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
>http://mailplus.yahoo.com
>.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3