From: LoizosCisco (david_steven2001@yahoo.com)
Date: Sat Dec 14 2002 - 02:11:39 GMT-3
Scott,
I have configured a couple of dozens of 6509 Layer 3
myself. I have only configured Native mode without any
vlans. You are right that there is an option to
configure vlans in Native mode, but I am trying to
figure out why would you configure vlans in a Native
mode when it behaves like a router.
Yes you are right about the link. It is for CSM. I
just found the link and thought is the right one. Must
search again to find the right link for MSFC.
Thanks
--- "R. Scott King" <scking@cisco.com> wrote:
> Why would you think that a 6500 running Native code
> couldn't configure
> VLANS? All you have to do is:
>
> config t
> vlan <vlan #>
>
> int fa5/32
> switchport mode access
> switchport access vlan <vlan #>
>
> My client (Sprint Enterprise) has 53 of these in
> their core, some using
> Native and others running Hybrid.
>
> BTW, the first link you sent is for configuring the
> Content Switching Module
> (CSM), not the 6500 in general.
>
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> LoizosCisco
> Sent: Friday, December 13, 2002 7:54 PM
> To: R. Scott King; george gittins;
> ccielab@groupstudy.com
> Subject: RE: vlans with the 6509
>
>
> Both Native and Hybrid are running IOS don't they?
>
> Native mode is behaving like a router (no vlans).
>
> Hybrid mode is behaving both as router and switch
> and
> must configure vlans..
>
>
http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration
> _example09186a0080116ff0.shtml
>
>
> 6509 command reference:
>
>
http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_refer
> ence_chapter09186a00800fb5d2.html
>
>
> --- "R. Scott King" <scking@cisco.com> wrote:
> > If your Sup is running IOS, it's Native.
> >
> >
> > R. Scott King
> > Network Consulting Engineer
> > Cisco Systems, Inc.
> > Infrastructure Engineering Services - SP
> > 9155 E. Nichols Avenue Suite 400
> > Englewood, CO 80112
> > 720.895.6056 (desk)
> > 720.244.5879 (cell)
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com]On Behalf Of
> > george gittins
> > Sent: Friday, December 13, 2002 12:52 PM
> > To: ccielab@groupstudy.com
> > Subject: FW: vlans with the 6509
> >
> >
> > How would I know?.hybrid is set based, my 6509 has
> > also a layer 3 module
> > built in.
> >
> > George Gittins
> > Network and Computer Maintenance Supervisor
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com] On Behalf Of R.
> > Scott King
> > Sent: Friday, December 13, 2002 12:32 PM
> > To: george gittins
> > Cc: ccielab@groupstudy.com
> > Subject: RE: vlans with the 6509
> >
> > Is your 6500 running Native or Hybrid code?
> >
> >
> > R. Scott King
> > Network Consulting Engineer
> > Cisco Systems, Inc.
> > Infrastructure Engineering Services - SP
> > 9155 E. Nichols Avenue Suite 400
> > Englewood, CO 80112
> > 720.895.6056 (desk)
> > 720.244.5879 (cell)
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com]On Behalf Of
> > Larry Letterman
> > Sent: Friday, December 13, 2002 11:10 AM
> > To: george gittins
> > Cc: ccielab@groupstudy.com
> > Subject: Re: vlans with the 6509
> >
> >
> > switch-1(enable) set vlan 10 name myvlan 5/1-48
> >
> > the above sets up a vlan with the id number 10,
> with
> > the name myvlan and
> > puts all the ports in module 5
> > in that vlan......
> >
> > george gittins wrote:
> >
> > >Does anyone have an example or a link to
> configure
> > vlans with the 6500
> > >family
> > >
> > >
> > >
> > >George Gittins
> > >
> > >Network and Computer Maintenance Supervisor
> > >.
> > .
> > .
> > .
> > .
> >
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3