From: R. Scott King (scking@cisco.com)
Date: Sat Dec 14 2002 - 00:26:21 GMT-3
Why would you think that a 6500 running Native code couldn't configure
VLANS? All you have to do is:
config t
vlan <vlan #>
int fa5/32
switchport mode access
switchport access vlan <vlan #>
My client (Sprint Enterprise) has 53 of these in their core, some using
Native and others running Hybrid.
BTW, the first link you sent is for configuring the Content Switching Module
(CSM), not the 6500 in general.
R. Scott King
Network Consulting Engineer
Cisco Systems, Inc.
Infrastructure Engineering Services - SP
9155 E. Nichols Avenue Suite 400
Englewood, CO 80112
720.895.6056 (desk)
720.244.5879 (cell)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
LoizosCisco
Sent: Friday, December 13, 2002 7:54 PM
To: R. Scott King; george gittins; ccielab@groupstudy.com
Subject: RE: vlans with the 6509
Both Native and Hybrid are running IOS don't they?
Native mode is behaving like a router (no vlans).
Hybrid mode is behaving both as router and switch and
must configure vlans..
http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration
_example09186a0080116ff0.shtml
6509 command reference:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_refer
ence_chapter09186a00800fb5d2.html
--- "R. Scott King" <scking@cisco.com> wrote:
> If your Sup is running IOS, it's Native.
>
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> george gittins
> Sent: Friday, December 13, 2002 12:52 PM
> To: ccielab@groupstudy.com
> Subject: FW: vlans with the 6509
>
>
> How would I know?.hybrid is set based, my 6509 has
> also a layer 3 module
> built in.
>
> George Gittins
> Network and Computer Maintenance Supervisor
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of R.
> Scott King
> Sent: Friday, December 13, 2002 12:32 PM
> To: george gittins
> Cc: ccielab@groupstudy.com
> Subject: RE: vlans with the 6509
>
> Is your 6500 running Native or Hybrid code?
>
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> Larry Letterman
> Sent: Friday, December 13, 2002 11:10 AM
> To: george gittins
> Cc: ccielab@groupstudy.com
> Subject: Re: vlans with the 6509
>
>
> switch-1(enable) set vlan 10 name myvlan 5/1-48
>
> the above sets up a vlan with the id number 10, with
> the name myvlan and
> puts all the ports in module 5
> in that vlan......
>
> george gittins wrote:
>
> >Does anyone have an example or a link to configure
> vlans with the 6500
> >family
> >
> >
> >
> >George Gittins
> >
> >Network and Computer Maintenance Supervisor
> >.
> .
> .
> .
> .
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3