From: R. Scott King (scking@cisco.com)
Date: Sat Dec 14 2002 - 00:12:21 GMT-3
When the MSFC runs IOS and the Sup runs CatOS, that's Hybrid. When the MSFC
runs IOS and so does the Sup, that's Native.
R. Scott King
Network Consulting Engineer
Cisco Systems, Inc.
Infrastructure Engineering Services - SP
9155 E. Nichols Avenue Suite 400
Englewood, CO 80112
720.895.6056 (desk)
720.244.5879 (cell)
-----Original Message-----
From: LoizosCisco [mailto:david_steven2001@yahoo.com]
Sent: Friday, December 13, 2002 7:59 PM
To: R. Scott King; george gittins
Cc: ccielab@groupstudy.com
Subject: RE: vlans with the 6509
6509 configurations:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_installation_
and_configuration_guide_chapter09186a008007fa6c.html
advance 6509 configurations:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_installation_
and_configuration_guide_chapter09186a008007fa69.html
--- "R. Scott King" <scking@cisco.com> wrote:
> Is your 6500 running Native or Hybrid code?
>
>
> R. Scott King
> Network Consulting Engineer
> Cisco Systems, Inc.
> Infrastructure Engineering Services - SP
> 9155 E. Nichols Avenue Suite 400
> Englewood, CO 80112
> 720.895.6056 (desk)
> 720.244.5879 (cell)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> Larry Letterman
> Sent: Friday, December 13, 2002 11:10 AM
> To: george gittins
> Cc: ccielab@groupstudy.com
> Subject: Re: vlans with the 6509
>
>
> switch-1(enable) set vlan 10 name myvlan 5/1-48
>
> the above sets up a vlan with the id number 10, with
> the name myvlan and
> puts all the ports in module 5
> in that vlan......
>
> george gittins wrote:
>
> >Does anyone have an example or a link to configure
> vlans with the 6500
> >family
> >
> >
> >
> >George Gittins
> >
> >Network and Computer Maintenance Supervisor
> >.
> .
> .
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3