From: Joe (groupstudy@comcast.net)
Date: Thu Dec 12 2002 - 22:14:18 GMT-3
I do it all the time, so I would guess you have a bad hardware or
incompatible code. Your other posts seem to rule out hardware, but I'd
double-check. Whatever it is, it absolutely should work with no black
magic, and it really is very simple. Maybe the UK phones do something
different, who knows. I've used many different code versions and never
had any problems.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jennifer Bellucci
Sent: Thursday, December 12, 2002 10:57 AM
To: ccielab@groupstudy.com
Subject: VIC-2FXS Where's the dial tone?
Hello
I have a VIC-2FXS with a NM-1V on a c2620. When I connect the phone to
port 1 I get a dial tone, no problems. When I connect the second phone
all I get is air/no dial tone. On CCO they have written that port 0
use's US phone wire, so I got hold of some and still nothing.
The phones are new. Can someone tell me how in the blue hell do you get
both phones to get dial tone. I tried connecting one at a time, same
problem. Someone out there must be using both ports with phones
connected right?
I am based in the UK, if that helps.
Appreciate the advice.
Jennifer Bellucci
Jennifer_bellucci@hotmail.com
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:44 GMT-3