From: Hung, Sing-Yu (Sing-Yu.Hung@pccw.com)
Date: Tue Dec 10 2002 - 23:27:32 GMT-3
Dear,
Just from CISCO that 3550 doesn't support route-map, so is there any
other method such that we can do the same thing as route-map on 3550?
10.10.10.0----------(e0)R1(e1)---------20.20.20.0
(e2)
|
|
|
|
30.30.30.0
A PC on 30.30.30.0 ping to 20.20.20.0, but I have to use route-map
apply on e2 to route the packet to 10.10.10.0 then 20.20.20.0. No route-map
on 3550 so another method?
Bradford Hung
Pacific Century CyberWorks
Tel: 288 33125
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:43 GMT-3