From: Desmond (cciestudy@sympatico.ca)
Date: Wed Dec 04 2002 - 17:12:51 GMT-3
I found the Interface vlan x will not pass routing to a router on same VLan.
I need to change the port with "no switch port" and assign IP to it in order
to make it work. I think it worked before with the previous verion. Vlan
interface will not be activated until there is at least one connection for
that vlan.
e.g.
Cat3550
Inter vlan 10
ip add 10.10.10.1
Router Eigrp 1
network 10.0.0.0
2600
Inte fa 0/0
ip add 10.10.10.2
Router Eigrp 1
network 10.0.0.0
Appreicate for anyone provide information !
Desmond
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:38 GMT-3