From: Brian Dennis (brian@5g.net)
Date: Sun Dec 01 2002 - 04:55:42 GMT-3
Yes, if you set the OSPF priority under the interface you can't also use
the neighbor statement for a neighbor on that same interface.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
-----Original Message-----
From: Ron [mailto:id353@singnet.com.sg]
Sent: Saturday, November 30, 2002 11:50 PM
To: Brian Dennis; surenv@hpssk211.sgp.hp.com; ccielab@groupstudy.com
Subject: RE: Can't Add Nei Statement
Hi Dennis,
I had also experienced this problem before. Will the addition of the "ip
ospf pri 0" under the interface denies the creation the neighbor peer ?
I was using both the ip ospf pri and ip ospf hello command to convert
the link to an NBMA. The lab I was doing would not allow the use of the
network command.
TIA.
Ron
>From Brian Dennis <brian@5g.net> on 30 Nov 2002:
> Suren,
> Are you also trying to use the "ip ospf priority" command under the
> interface?
>
> Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Surendran
> Sent: Saturday, November 30, 2002 9:16 PM
> To: Ccielab
> Subject: Can't Add Nei Statement
>
> Hi Guys,
> I am unable to add neighbor statement when I am configuring OSPF
> Non-broadcast network. Is there something wrong with the IOS?
>
> Suren
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:37 GMT-3