From: Charles T. Alexander (ctalex405@yahoo.com)
Date: Sat Nov 30 2002 - 19:22:14 GMT-3
The tunnel is to r2. It is an exercise in not using
the area x virtual-link rid which I did use and the
replaced with the tunnel. Below is r2
r2#r
Building configuration...
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname r2
!
enable password radnor
!
ip subnet-zero
no ip domain-lookup
!
interface Loopback0
ip address 135.1.12.2 255.255.255.0
!
interface Tunnel0
ip address 135.1.101.2 255.255.255.0
tunnel source 135.1.20.2
tunnel destination 135.1.20.3
!
interface BRI0/0
no ip address
shutdown
!
interface Ethernet0/0
ip address 135.1.4.2 255.255.255.240
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
!
interface Serial1/0
ip address 135.1.20.2 255.255.252.0
encapsulation x25
ip ospf network point-to-multipoint
no ip mroute-cache
bandwidth 64
x25 address 2222
x25 map ip 135.1.20.3 3333 broadcast
x25 map ip 135.1.20.4 4444 broadcast
!
interface Serial1/1
no ip address
shutdown
clockrate 2015232
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
router ospf 11
network 135.1.12.0 0.0.0.255 area 2
network 135.1.4.0 0.0.0.15 area 2
network 135.1.20.0 0.0.3.255 area 4
network 135.1.101.0 0.0.0.255 area 0
area 2 range 135.1.4.0 255.255.255.0
area 2 range 135.1.12.0 255.255.255.0
!
ip classless
logging buffered 10000 debugging
!
alias exec i show ip route
alias exec r show run
alias exec c config t
alias exec u undebug all
alias exec b show ip bgp
alias exec bs show ip bgp sum
alias exec s show ip int brief
!
line con 0
exec-timeout 0 0
logging synchronous
escape-character 27
line aux 0
line vty 0 4
password bp
login
!
end
r2#
--- "D. J. Jones" <meganac@attbi.com> wrote:
> Where is the tunnel destination address on router
> r3?
> ----- Original Message -----
> From: "Charles T. Alexander" <ctalex405@yahoo.com>
> To: "GroupStudy" <ccielab@groupstudy.com>
> Sent: Saturday, November 30, 2002 1:02 PM
> Subject: Redist Problem ospf igrp rip
>
>
> > r2 &
> > r3---x.25--r4--ethernet--r5
> > ospf ospf igrp
> > igrp rip
> >
> > r5 can ping r4, r3, r2
> > r4 can ping r2, r3, r5
> > r2&r3 can ping r4
> > r3&r2 can't ping r5
> >
> > I think I am missing some concept.
> >
> > Below are the configs for r3,r4,r5
> >
> > r3#r
> > Building configuration...
> >
> > Current configuration:
> > !
> > version 12.1
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname r3
> > !
> > logging buffered 10000 debugging
> > enable password radnor
> > !
> > !
> > !
> > !
> > !
> > ip subnet-zero
> > no ip domain-lookup
> > !
> > lane client flush
> > cns event-service server
> > !
> > !
> > !
> > !
> > !
> > interface Loopback0
> > ip address 135.1.13.3 255.255.255.0
> > ip ospf network point-to-point
> > !
> > interface Tunnel0
> > ip address 135.1.101.3 255.255.255.0
> > tunnel source 135.1.20.3
> > tunnel destination 135.1.20.2
> > !
> > interface BRI0/0
> > no ip address
> > shutdown
> > !
> > interface Ethernet0/0
> > no ip address
> > shutdown
> > !
> > interface TokenRing0/0
> > ip address 135.1.3.3 255.255.255.240
> > ring-speed 16
> > !
> > interface Serial1/0
> > bandwidth 64
> > ip address 135.1.20.3 255.255.252.0
> > encapsulation x25
> > ip ospf network point-to-multipoint
> > x25 address 3333
> > x25 map ip 135.1.20.2 2222 broadcast
> > x25 map ip 135.1.20.4 4444 broadcast
> > !
> > interface Serial1/1
> > no ip address
> > shutdown
> > clockrate 2015232
> > !
> > interface Serial1/2
> > no ip address
> > shutdown
> > clockrate 2015232
> > !
> > interface Serial1/3
> > no ip address
> > shutdown
> > !
> > router ospf 11
> > area 0 range 135.1.3.0 255.255.255.0
> > network 135.1.3.0 0.0.0.15 area 0
> > network 135.1.13.0 0.0.0.255 area 0
> > network 135.1.20.0 0.0.3.255 area 4
> > network 135.1.101.0 0.0.0.255 area 0
> > !
> > ip classless
> > no ip http server
> > !
> > !
> > alias exec i show ip route
> > alias exec r show run
> > alias exec c config t
> > alias exec u undebug all
> > alias exec b show ip bgp
> > alias exec bs show ip bgp sum
> > alias exec s show ip int brief
> > !
> > line con 0
> > exec-timeout 0 0
> > logging synchronous
> > transport input none
> > escape-character 27
> > line aux 0
> > line vty 0 4
> > password bp
> > login
> > !
> > end
> >
> > -------------------
> > r4#r
> > Building configuration...
> >
> > Current configuration : 1297 bytes
> > !
> > version 12.2
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname r4
> > !
> > logging buffered 10000 debugging
> > enable password radnor
> > !
> > ip subnet-zero
> > no ip domain-lookup
> > !
> > !
> > !
> > !
> > interface Loopback0
> > ip address 135.1.14.4 255.255.255.0
> > !
> > interface Ethernet0
> > bandwidth 1500
> > ip address 135.1.1.4 255.255.255.0
> > !
> > interface Serial0
> > bandwidth 64
> > ip address 135.1.20.4 255.255.252.0
> > encapsulation x25
> > ip ospf network point-to-multipoint
> > x25 address 4444
> > x25 map ip 135.1.20.3 3333 broadcast
> > x25 map ip 135.1.20.2 2222 broadcast
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > interface TokenRing0
> > no ip address
> > shutdown
> > !
> > router ospf 11
> > log-adjacency-changes
> > summary-address 135.1.20.0 255.255.255.0
> > redistribute igrp 11 subnets
> > network 135.1.20.0 0.0.3.255 area 4
> > !
> > router igrp 11
> > redistribute ospf 11
> > passive-interface Serial0
> > network 135.1.0.0
> > default-metric 64 10 254 1 1500
> > !
> > ip classless
> > ip http server
> > ip pim bidir-enable
> > !
> > !
> > alias exec i show ip route
> > alias exec r show run
> > alias exec c config t
> > alias exec u undebug all
> > alias exec b show ip bgp
> > alias exec bs show ip bgp sum
> > alias exec s show ip int brief
> > !
> > line con 0
> > exec-timeout 0 0
> > logging synchronous
> > escape-character 27
> > line aux 0
> > line vty 0 4
> > password bp
> > login
> > !
> > end
> >
> > r4
> >
> ---------------------------------------------------
> > r5#r
> > Building configuration...
> >
> > Current configuration : 1231 bytes
> > !
> > version 12.2
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname r5
> > !
> > logging buffered 10000 debugging
> > enable password radnor
> > !
> > ip subnet-zero
> > no ip domain-lookup
> > !
> > !
> > !
> > !
> > interface Loopback0
> > ip address 135.1.15.5 255.255.255.0
> > !
> > interface Loopback1
> > ip address 12.1.1.1 255.255.255.0
> > !
> > interface Ethernet0
> > ip address 135.1.1.5 255.255.255.0
> > !
> > interface Serial0
> > no ip address
> > shutdown
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > router rip
> > redistribute igrp 11
> > passive-interface Ethernet0
> > passive-interface Loopback0
> > network 12.0.0.0
> > default-metric 1
> > !
> > router igrp 11
> > redistribute rip
> > passive-interface Loopback1
> > network 135.1.0.0
> > default-metric 64 10 254 1 1500
> > distribute-list 1 out
> > !
> > ip classless
> > ip http server
> > ip pim bidir-enable
> > !
> > access-list 1 permit 135.1.15.0 0.0.0.255
> > access-list 1 permit 12.0.0.0 0.255.255.255
> > !
> > alias exec i show ip route
> > alias exec r show run
> > alias exec c config t
> > alias exec u undebug all
> > alias exec b show ip bgp
> > alias exec bs show ip bgp sum
> > alias exec s show ip int brief
> > !
> > line con 0
> > exec-timeout 0 0
> > logging synchronous
> > escape-character 27
> > line 1 8
> > flush-at-activation
> > line aux 0
> > line vty 0 4
> > password bp
> > login
> > !
> > end
> >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up
> now.
> > http://mailplus.yahoo.com
>
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:13 GMT-3