From: Anas Tarsha (ra3i@yahoo.com)
Date: Fri Nov 29 2002 - 18:05:45 GMT-3
Peter:
There are three and only three ways to summarize BGP
routes:
1- using the aggregate command
2- Creating a static router to Null 0 and then using
the network statement to advertise this network.
3- Creating a static route to Null 0 for the specific
summary and then redistributing static.
If you can not use the aggregate command and can not
create a static route then there is no other way for
doing this.
--- Peter Wodle <peter_wodle@hotmail.com> wrote:
> well that is what I thought but the exercise does
> not allow this..
>
>
> >From: Jay Greenberg <groupstudylist@execulink.com>
> >To: Peter Wodle <peter_wodle@hotmail.com>
> >CC: ccielab@groupstudy.com
> >Subject: Re: BGP Summary address without using
> Summary command
> >Date: 28 Nov 2002 10:47:28 -0500
> >
> >see the aggregate-address (summary-only) command.
> >
> >On Thu, 2002-11-28 at 09:25, Peter Wodle wrote:
> > > I have a number of subnets on BGP router Rb.
> Want this Rb to foward only
> >a
> > > single address to Rc (a IGBP peer). But do not
> want to use the
> > > summary-address or summary-only commands. Any
> ideas what else I can use?
> >Can
> > > someone point to a ref pls.
> > >
> > >
> > >
> > >
> > >
> > >
>
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:12 GMT-3