From: Putti Dhamrongsirivadh (putti@ait.co.th)
Date: Mon Nov 18 2002 - 23:25:07 GMT-3
Hi all,
I have one voip dial-peer that points session target to ras as command
"session target ras". If the voice gateway cannot communicate to the
Gatekeeper, the voice call is unable to set up successfully. So I create
another voip dial-peer, with the same destination-pattern, that points to
an exact destination voice gateway as command "session target
ipv4:10.1.1.1". In order for originating gateway to be able to make a call
in case of lost gatekeeper connection, can I configure like this to make
the second voip dial-peer a backup of the ras voip dial-peer?
regards,
putti
config:
dial-peer voice 1 voip
destination-pattern 200
session target ras
dial-peer voice 2 voip ----> backup for dial-peer 1
destination-pattern 200
session target ipv4:10.1.1.1
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:05 GMT-3