From: Weidong Xiao (Weidong.Xiao@vi.net)
Date: Wed Nov 13 2002 - 16:53:02 GMT-3
Hi group,
I was running EMI on a 3550 and 'ip routing' enabled, but couldn't set up a layer 3 etherchannel.
Can somebody tell me what I missed?
Thanks in advance,
Weidong
--------------------------------
interface FastEthernet0/1
description LINK-TO-RSW1
no ip address
duplex full
speed 100
channel-group 1 mode desirable non-silent
!
interface FastEthernet0/2
description LINK-TO-RSW1
no ip address
duplex full
speed 100
channel-group 1 mode desirable non-silent
and then:
SW3(config)#interface Port-channel1
SW3(config-if)#no sw
SW3(config-if)#no switchport
Command rejected: Not a convertable port. <-------WHY?
SW3(config-if)#ip address 2.2.2.2 255.0.0.0
% IP addresses may not be configured on L2 links.
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:59 GMT-3