From: Chuck Church (cchurch@MAGNACOM.com)
Date: Sun Nov 03 2002 - 20:17:31 GMT-3
I think you'll need a minimum of 12.0 Plus version. Are you sure about 8 mb
ram? I didn't think the 2600s ever shipped with less than 24 mb. Unless
you're talking about flash. Since the 2600s run from RAM, as opposed to
flash like the 2500s, you could always boot them from tftp. I don't think
you'll find a plus 12.0 image smaller than 8mb.
Chuck Church
CCIE #8776, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000
>Hi
>I have a number of 2600 series routers with 8Mb memory. Just wondering if
anyone could point me
>towards a minimum s/w load to allow me play with voice. Most of the
options I see on the Cisco site
>require 16Mb...does voice require 16Mb?
>Thanks
>K
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:52 GMT-3