From: Sara Li (saralilin@hotmail.com)
Date: Sun Nov 03 2002 - 20:54:12 GMT-3
isn't the default byte count 1500?
>From: "Mark" >Reply-To: "Mark" >To: >Subject: Re: Heeelp!! Urgent !!
CCIE question about CQ >Date: Sun, 3 Nov 2002 18:18:31 -0000 > >since a
version of code I don't recall which the cisco averages out the >queues.
Just throw in 2000 for DLSW and 2000 for the default and away you go. >
>The byte-count-number argument specifies the average number of bytes the
>system allows to be delivered from a given queue during a particular
cycle. > >----- Original Message ----- >From: "Ayman Hamza" >To: ; >Sent:
Sunday, November 03, 2002 4:04 PM >Subject: Re: Heeelp!! Urgent !! CCIE
question about CQ > > >Hi Mark; > >Thanks for your reply. The CBWFQ
config will work. Ofcourse I share with >you the idea that the DLSw+
traffic is started from the router itself >as no DLSw+ encapsulation
takes place at any SNA/NetBIOS station >on the ethernet segment. But For
me the question is tricky a little bit. > >For me the only way to solve
this: >1- either use the CBWFQ configuration , or > >2- Use the TCP port
2065 . But teh question is, HOW I CAN CALCULATE >THE BUTE-COUNTS ??! I
got an answer from Peter you can see it on this alias >saying that byte
count is 5000 for both DLSw+ and other traffic. Is this >correct ! and
how this calculation has been done ! > >I hope I can get an answer for
this question above !! > >Regards; >Ayman > > > From
nobody@groupstudy.com Sun Nov 3 16:29:56 2002 > > From: "Mark" > > To: >
> Subject: Re: Heeelp!! Urgent !! CCIE question about CQ > > Date: Sun, 3
Nov 2002 15:02:21 -0000 > > MIME-Version: 1.0 > >
Content-Transfer-Encoding: 7bit > > X-Mailer: Microsoft Outlook Express
6.00.2600.0000 > > X-ASK-Info: Whitelist match > > Sender:
nobody@groupstudy.com > > Reply-To: "Mark" > > > > To my mind this
wouldn't work - DLSW traffic originates from the router >itself > > and
so doesn't 'enter from the eth 0' > > > > thoughts ? > > > >
-----Original Message----- > > From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com] On Behalf Of > > csc david > > Sent:
Sunday, November 03, 2002 9:19 AM > > To: Ayman Hamza > > Cc:
ccielab@groupstudy.com > > Subject: Re: Heeelp!! Urgent !! CCIE question
about CQ > > > > > > I think : > > class-map dlswtraffic > > match
input-interface ethernet 0 > > match access-group "dlsw traffic
access-list" > > policy-map dlsw50percent > > class dlswtraffic > >
bandwidth percent 50 > > > > Ayman Hamza 5DU}ND#: Team; > > > > Sorry for
that high urgency. I have a question from a CCIE LAB exam > > which
saying - exact wording - : > > > > > > > >
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:52 GMT-3