From: Mark (ms6275@yahoo.de)
Date: Sun Nov 03 2002 - 15:18:31 GMT-3
since a version of code I don't recall which the cisco averages out the
queues. Just throw in 2000 for DLSW and 2000 for the default and away you go.
The byte-count-number argument specifies the average number of bytes the
system allows to be delivered from a given queue during a particular cycle.
----- Original Message -----
From: "Ayman Hamza" <ayhamza@cisco.com>
To: <ccielab@groupstudy.com>; <ms6275@yahoo.de>
Sent: Sunday, November 03, 2002 4:04 PM
Subject: Re: Heeelp!! Urgent !! CCIE question about CQ
Hi Mark;
Thanks for your reply. The CBWFQ config will work. Ofcourse I share with
you the idea that the DLSw+ traffic is started from the router itself
as no DLSw+ encapsulation takes place at any SNA/NetBIOS station
on the ethernet segment. But For me the question is tricky a little bit.
For me the only way to solve this:
1- either use the CBWFQ configuration , or
2- Use the TCP port 2065 . But teh question is, HOW I CAN CALCULATE
THE BUTE-COUNTS ??! I got an answer from Peter you can see it on this alias
saying that byte count is 5000 for both DLSw+ and other traffic. Is this
correct ! and how this calculation has been done !
I hope I can get an answer for this question above !!
Regards;
Ayman
> From nobody@groupstudy.com Sun Nov 3 16:29:56 2002
> From: "Mark" <ms6275@yahoo.de>
> To: <ccielab@groupstudy.com>
> Subject: Re: Heeelp!! Urgent !! CCIE question about CQ
> Date: Sun, 3 Nov 2002 15:02:21 -0000
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> X-Mailer: Microsoft Outlook Express 6.00.2600.0000
> X-ASK-Info: Whitelist match
> Sender: nobody@groupstudy.com
> Reply-To: "Mark" <ms6275@yahoo.de>
>
> To my mind this wouldn't work - DLSW traffic originates from the router
itself
> and so doesn't 'enter from the eth 0'
>
> thoughts ?
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> csc david
> Sent: Sunday, November 03, 2002 9:19 AM
> To: Ayman Hamza
> Cc: ccielab@groupstudy.com
> Subject: Re: Heeelp!! Urgent !! CCIE question about CQ
>
>
> I think :
> class-map dlswtraffic
> match input-interface ethernet 0
> match access-group "dlsw traffic access-list"
> policy-map dlsw50percent
> class dlswtraffic
> bandwidth percent 50
>
> Ayman Hamza <ayhamza@cisco.com> 5DU}ND#: Team;
>
> Sorry for that high urgency. I have a question from a CCIE LAB exam
> which saying - exact wording - :
>
>
>
> __________________________________________________________________
>
> Gesendet von Yahoo! Mail - http://mail.yahoo.de
> Yahoo! prdsentiert als offizieller Sponsor das Fu_ball-Highlight des
> Jahres: - http://www.FIFAworldcup.com
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3