From: Chris (clarson52@comcast.net)
Date: Sun Nov 03 2002 - 11:10:38 GMT-3
When you are doing dialer maps, it may be necessary to map on the remote
side (so you get a layer 3 to layer 2 mapping) just don't put in a phone
number. Then only one side can initiate the connection.
Also when you say it says you don't need a dialer map what is it?
----- Original Message -----
From: "Nathan Chessin" <nchessin@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, November 02, 2002 7:32 PM
Subject: Dynamic Dialer Map
> Hi all,
>
> When using ppp encapsulation on both sides of the DDR link, it says that I
> should only need a dialer map ip x.x.x.x broadcast <string> on one side of
> the link and the other side doesn't need a string or dialer map statement.
> However, when testing, I was unable to make the call.
>
> At the other end, the show dialer map command doesn't reveal any mapping.
> When I add the static dialer map, the call is completed and works.
Question
> is, why doesn't any dynamic mapping take place. Isn't this necessary for
> scenarios not wanting one end of a link to initiate the call?
>
> Thanks,
>
>
> Nate
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3