From: Nathan Chessin (nchessin@cisco.com)
Date: Sun Nov 03 2002 - 05:25:34 GMT-3
I am trying to have the satellite configured as simply as possible. Without
dialer string, without dialer map. This scenario works with dialer
profiles, but I haven't gotten it to work without them.
Nate
> -----Original Message-----
> From: Prashanth [mailto:prashanthcm@yahoo.com]
> Sent: Saturday, November 02, 2002 5:16 PM
> To: Nathan Chessin; ccielab@groupstudy.com
> Subject: Re: Dynamic Dialer Map
>
>
> Nathan
>
> a dialer string can be configured instead of the
> static dialer map?
>
> prashanth
> --- Nathan Chessin <nchessin@cisco.com> wrote:
> > Hi all,
> >
> > When using ppp encapsulation on both sides of the
> > DDR link, it says that I
> > should only need a dialer map ip x.x.x.x broadcast
> > <string> on one side of
> > the link and the other side doesn't need a string or
> > dialer map statement.
> > However, when testing, I was unable to make the
> > call.
> >
> > At the other end, the show dialer map command
> > doesn't reveal any mapping.
> > When I add the static dialer map, the call is
> > completed and works. Question
> > is, why doesn't any dynamic mapping take place.
> > Isn't this necessary for
> > scenarios not wanting one end of a link to initiate
> > the call?
> >
> > Thanks,
> >
> >
> > Nate
>
>
> __________________________________________________
> Do you Yahoo!?
> HotJobs - Search new jobs daily now
> http://hotjobs.yahoo.com/
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3