From: Jay (ccienxtyear@hotmail.com)
Date: Mon Oct 28 2002 - 15:38:40 GMT-3
Ok..guy...heres the deal.
IF on a particular router you are running OSPF, RIP, IGRP and EIGRP on
different interfaces and say OSPF is the core routing protocol for your
network. Do a mutual redistribution ONLY into OSPF using filters (allow only
RIP, IGRP, EIGRP) networks into OSPF. Rip routers will learn IGRP/EIGRP
routes and vice versa via OSPF. If the lab DOSE NOT say redistribute in
multiple routers, why would you even consider this ? However, you can
mutually redistribute between same 2 protocols on 2 different routers. Just
be careful of routing loops, so you use filters (ACL and Distribute list).
Also, if you unsure of whether you should redistribute BGP into your IGP,
ask the proctor.
Hope this clarifies your questions.
thanks,
Jay
----- Original Message -----
From: <Sam.MicroGate@usa.telekom.de>
To: <bhhan@netcom.co.kr>; <saralilin@hotmail.com>; <ccielab@groupstudy.com>
Sent: Monday, October 28, 2002 7:15 AM
Subject: RE: multiple redistribution point question
> If the lab did not stat to redistribute multiple protocols in multiple
> points and redistribution in a single router is enough for any to any
> connectivity, do I still have to redistribute in multiple routers? I asked
> many people and I got different answers. I hope if someone from Cisco
> answers this question. Thanks.
>
> Sam
>
> -----Original Message-----
> From: ??? [mailto:bhhan@netcom.co.kr]
> Sent: Sunday, October 27, 2002 8:24 PM
> To: Sara Li; ccielab@groupstudy.com
> Subject: Re: multiple redistribution point question
>
>
> hi...
> it's answer to your questions, you need that redi technique at real
> life...peculiarly on ISP company . ISP company commonly used the ospf and
> bgp protocol.
>
> that case needs Redi technique....
>
> thanks...
> regards.
> Byung Hark, Han
> ==============================
> Business Development
> NetCom Systems, Inc
> Tel: +82-2-2167-8558
> Fax:+82-2-2167-8600
> E-mail: bhhan@netcom.co.kr
> or kingpat@orgio.net
> http://www.netcom.co.kr
> ----- Original Message -----
> From: "Sara Li" <saralilin@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, October 28, 2002 9:14 AM
> Subject: multiple redistribution point question
>
>
> > Hi all,I am reading doyle tcp/ip redistribution section regarding
> > multipoing redistribution to provide redudancy. i have one question:is
> > it a common practice (in lab or real life ) to do redistribution at
> > all routers that running 2 routing protocols? even redudancy is not a
> > requirement?
> >
> > ----------------------------------------------------------------------
> > --
> >
> > Internet access plans that fit your lifestyle -- join MSN. Click Here
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:58 GMT-3