From: kym blair (kymblair@hotmail.com)
Date: Sat Oct 19 2002 - 19:31:16 GMT-3
Big B,
Try the following:
R14
interface ATM2/0
ip address 10.1.1.14 255.255.255.0
pvc 0/100
protocol ip 10.1.1.13 broadcast
protocol ip 10.1.1.14 broadcast
encapsulation aal5snap
!
atm clock INTERNAL
no atm ilmi-keepalive
!
ip classless
ip subnet-zero
R13
interface ATM2/0
ip address 10.1.1.13 255.255.255.0
pvc 0/100
protocol ip 10.1.1.13 broadcast
protocol ip 10.1.1.14 broadcast
encapsulation aal5snap
!
atm clock INTERNAL
no atm ilmi-keepalive
!
ip classless
ip subnet-zero
HTH, Kym
>From: BIGB97750@aol.com
>Reply-To: BIGB97750@aol.com
>To: ccielab@groupstudy.com
>Subject: ATM ON 7010 ROUTERS
>Date: Sat, 19 Oct 2002 15:44:46 EDT
>
>Everyone,
>
>I have to 7010 with atm processors on them. The interface are uni. Can I
>set
>them up back to back. If so I crossed connected the fiber from one box to
>the
>other. What troubles me is that I do not see a light inside my transmit
>fiber. If I look at atm vc I see statistics but I can not ping. Can anyone
>offer some help. Below are my configs
>
>
>R14
>interface ATM2/0
> ip address 10.1.1.14 255.255.255.0
> no keepalive
> map-group pvc-static
> atm pvc 10 0 100 aal5snap
>!
>no ip classless
>!
>map-list pvc-static
> ip 10.1.1.13 atm-vc 10 broadcast
>
>
>R13
>
>interface ATM2/0
> ip address 10.1.1.13 255.255.255.0
> no keepalive
> map-group pvc-static
> atm clock INTERNAL
> atm pvc 10 0 300 aal5snap inarp 1
>
>map-list pvc-static
> ip 10.1.1.14 atm-vc 10
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:51 GMT-3