From: Peng Zheng (zpnist@yahoo.com)
Date: Sat Oct 19 2002 - 13:49:37 GMT-3
I think one number is OK. It works welll now.
I changed the simulator to net3 then changed back, it
worked. I don't know what's the problem.
Thanks for reply.
--- Phil <ciscostudent1@yahoo.com.br> wrote:
>
> Shouldn't each port have 2 different phone numbers
> as well as spid numbers?
>
> Phil
>
>
>
> Peng Zheng <zpnist@yahoo.com> wrote:I got a ISDN
> simulator from Vconsole. I use two 2520
> to connect throught bri 0. I connect bri0 to ISDN
> simulator through straight-through cable. I leave
> the
> default setup:
> Both ports use ni-1
> Port A: Phone 1: 4081111111
> Phone 2: 4081111111
> Spid 1: 40811111111
> Spid 2: 40811111112
> Port B: Phone 1: 4082222222
> Phone 2: 4082222222
> Spid 1: 40822222221
> Spid 2: 40822222222
>
> Port A connect to R1 and Port B to R2.
>
> on R1, I config:
> isdn switch basic-ni1
> interface bri0
> ip address 192.168.200.1 255.255.255.0
> isdn spid1 40811111111 4081111111
> isdn spid2 40811111112 4081111111
> dialer map ip 192.168.200.2 name R2 4082222222 broad
> dialer-group 1
>
> dialer-list 1 protocol ip permit
>
>
> On R2:
>
> isdn switch basic-ni1
> interface bri0
> ip address 192.168.200.2 255.255.255.0
> isdn spid1 40822222221 4082222222
> isdn spid2 40822222222 4082222222
> dialer map ip 192.168.200.1 name R1 4081111111 broad
> dialer-group 1
>
> dialer-list 1 protocol ip permit
>
> When I use show isdn status, I got:
>
> Global ISDN Switchtype = basic-ni
> ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-ni
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 255, Ces = 1, SAPI = 0, State =
> ESTABLISH_AWAITING_TEI
> TEI Not Assigned, ces = 1, state = 3(await
> establishment)
> spid1 configured, spid1 NOT sent, spid1
> NOT valid
> TEI Not Assigned, ces = 2, state = 1(terminal
> down)
> spid2 configured, spid2 NOT sent, spid2
> NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> CCB:callid=0, sapi=0, ces=1, B-chan=0,
> calltype=INTERNAL
> Active dsl 0 CCBs = 1
> The Free Channel Mask: 0x80000003
> Total Allocated ISDN CCBs = 1
>
> At the beginning, one of them worked. But now, I got
> this info on both of them.
>
>
> Does anyone know what's the problem?
>
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
>
>
>
>
>
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
>
>
> ---------------------------------
> Yahoo! GeoCities
> Tudo para criar o seu site: ferramentas f醕eis
de
> usar, espa鏾 de sobra e acess髍ios.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:51 GMT-3