From: aansar@sscomp.com.sg
Date: Fri Oct 18 2002 - 14:20:20 GMT-3
in the server
add : dialer enable-timeout xxx
in the client
add : dialer wait-for-carrier-time xxxx
and make sure the the time mentioned in the dailer wait-for-carrier-time
is double the value of dialer enable-timeout
debug dialer.. is very helpful.. check it out
Pieter Jordaan <pieterj@is.co.za>
Sent by: nobody@groupstudy.com
10/18/2002 08:43 PM
Please respond to Pieter Jordaan
To: "'Sam.MicroGate@usa.telekom.de'" <Sam.MicroGate@usa.telekom.de>,
ccielab@groupstudy.com
cc:
Subject: RE: ISDN Callback
Sam
It seems I had the same problem 2 days ago, and I believed my config to be
correct, What I have noticed and what also solved my problem was that we
both used a class called callback. After I changed the class name to
something else my problem went away, so it seems that the ISDN has an
issue
if you want to do callback with a class called callback.
Please let me know if this solved your problem and hopefully it will also
help others.
Regards
Pieter
-----Original Message-----
From: Sam.MicroGate@usa.telekom.de [mailto:Sam.MicroGate@usa.telekom.de]
Sent: 17 October 2002 08:37 PM
To: ccielab@groupstudy.com
Subject: ISDN Callback
Hello all,
Below is my isdn configuration for a call back between R2 and R5.
Everything
is working fine without the callback feature being configured. However,
when
I configure the call back and ping from the client, the server does not
callback. Am I missing anything? Thanks for your help;
Server:
username R5 password 0 cisco
!!
isdn switch-type basic-ni
interface BRI0
ip address 162.168.25.2 255.255.255.0
encapsulation ppp
dialer map ip 162.168.25.5 name R5 class callback broadcast 609206
dialer map ip 162.168.25.5 name R5 class callback broadcast 609207
dialer-group 1
isdn switch-type basic-ni
isdn spid1 609208
isdn spid2 609209
ppp callback accept
ppp authentication chap
map-class dialer callback
dialer callback-server username
dialer-list 1 protocol ip permit
Client:
username R2 password 0 cisco
!!
isdn switch-type basic-ni
interface BRI0
ip address 162.168.25.5 255.255.255.0
encapsulation ppp
dialer map ip 162.168.25.2 name R2 broadcast 609208
dialer map ip 162.168.25.2 name R2 broadcast 609209
dialer-group 1
isdn switch-type basic-ni
isdn spid1 609206
isdn spid2 609207
ppp callback request
ppp authentication chap
dialer-list 1 protocol ip permit
"This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates
("the
sending company ") any opinion or advice contained in this e-mail is
subject
to the terms and conditions expressed in any applicable terms of business
or
client engagement letter . The sending company does not accept liability
for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail."
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3