From: Sam.MicroGate@usa.telekom.de
Date: Thu Oct 17 2002 - 15:36:50 GMT-3
Hello all,
Below is my isdn configuration for a call back between R2 and R5. Everything
is working fine without the callback feature being configured. However, when
I configure the call back and ping from the client, the server does not
callback. Am I missing anything? Thanks for your help;
Server:
username R5 password 0 cisco
!!
isdn switch-type basic-ni
interface BRI0
ip address 162.168.25.2 255.255.255.0
encapsulation ppp
dialer map ip 162.168.25.5 name R5 class callback broadcast 609206
dialer map ip 162.168.25.5 name R5 class callback broadcast 609207
dialer-group 1
isdn switch-type basic-ni
isdn spid1 609208
isdn spid2 609209
ppp callback accept
ppp authentication chap
map-class dialer callback
dialer callback-server username
dialer-list 1 protocol ip permit
Client:
username R2 password 0 cisco
!!
isdn switch-type basic-ni
interface BRI0
ip address 162.168.25.5 255.255.255.0
encapsulation ppp
dialer map ip 162.168.25.2 name R2 broadcast 609208
dialer map ip 162.168.25.2 name R2 broadcast 609209
dialer-group 1
isdn switch-type basic-ni
isdn spid1 609206
isdn spid2 609207
ppp callback request
ppp authentication chap
dialer-list 1 protocol ip permit
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3