From: aansar@sscomp.com.sg
Date: Fri Oct 18 2002 - 14:21:49 GMT-3
this is only with older version of IOS.. with 12.1 ..it shouldnt matter
"Erling Bjxntegerd \(Privat\)" <erli-b@online.no>
Sent by: nobody@groupstudy.com
10/18/2002 05:33 PM
Please respond to "Erling Bjxntegerd \(Privat\)"
To: "Nathan Chessin" <nchessin@cisco.com>
cc: <ccielab@groupstudy.com>
Subject: Re: BGP inbound route-map
Hi,
look at following link
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/icsbgp4.htm#xtocid204393
4
where it is stated:
Route Map Filtering
The neighbor route-map router configuration command can be used to apply a
route map to incoming and outgoing routes.
-----------------------------------------------------------------------------
--- Note The neighbor route-map command has no effect on incoming updates when matching is based on IP address. ----------------------------------------------------------------------------- ---You can find the document on the UniverCD at 'Internetworking Case Studies' and then 'Using the Border Gateway Protocol for Interdomain Routing'.
Regards Erling Bjontegard
----- Original Message ----- From: "Nathan Chessin" <nchessin@cisco.com> To: <ccielab@groupstudy.com> Sent: Friday, October 18, 2002 7:09 AM Subject: BGP inbound route-map
> Hi all, > > Is it still true that you can not filter inbound BGP updates with a > route-maps that matches on ip address in the BGP neighbor command? > > > Nate
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3