RE: serial interface up and down

From: Joe Martin (jmartin@capitalpremium.net)
Date: Thu Oct 17 2002 - 13:06:13 GMT-3

• Next message: Hedi Abdelkafi: "Sollie Darth Reid : Problem with Redistribution between OSPF"
• Previous message: Robert Wagner: "RE: serial interface up and down"
• Maybe in reply to: chenyan: "serial interface up and down"
• Next in thread: LoizosCisco: "Re: serial interface up and down"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Make sure that the router with the DCE end of the cable is providing clock.
If you set clock rate on the DTE side, the interface will flap, often
hundreds of times per minute.

Joe Martin

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
chenyan
Sent: Thursday, October 17, 2002 8:39 AM
To: ccielab
Subject: serial interface up and down

Hi,guys

My interface serial is up and down always, they are back-to-back. why?

Thanks

• Next message: Hedi Abdelkafi: "Sollie Darth Reid : Problem with Redistribution between OSPF"
• Previous message: Robert Wagner: "RE: serial interface up and down"
• Maybe in reply to: chenyan: "serial interface up and down"
• Next in thread: LoizosCisco: "Re: serial interface up and down"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:49 GMT-3