RE: serial interface up and down

From: Robert Wagner (rwagner@logosinc.com)
Date: Thu Oct 17 2002 - 13:04:12 GMT-3


Is your encapsulation the same on both sides of the link?

 
Robert Wagner
Systems Engineer
LOGOS Communications, Inc.
rwagner@logosinc.com <mailto:rwagner@logosinc.com>
 
"Success is directly proportional
to attitude and preparation..."
 

-----Original Message-----
From: mdye@bevillcntr.org [mailto:mdye@bevillcntr.org]
Sent: Thursday, October 17, 2002 11:00 AM
To: chenyan; ccielab
Subject: Re: serial interface up and down

Did you put a Clock rate on the interface with the DCE cable?

At 10:38 PM 10/17/02 +0800, chenyan wrote:
>Hi,guys
>
>My interface serial is up and down always, they are back-to-back. why?
>
>Thanks
>
Mark A. Dye, CCNP, CCDP, CCAI, MCSE(W2K), MCSE(NT4), MCT, MCP+I, MCP, NET+,
CBET
Technology Manager
Bevill Manufacturing Technology Center
401 Trade School Road
Gadsden, AL 35903

Phone: 256.549.8165
Fax: 256.547.5790
email: mdye@bevillcntr.org
http://www.bevillcntr.org/staff.html#mark

It is a funny thing about life: if you refuse to accept anything but the
best you very often get it. -William Somerset Maugham



This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:49 GMT-3