Sollie Darth Reid : Problem with Redistribution between OSPF

From: Hedi Abdelkafi (Hedi.Abdelkafi@simac.lu)
Date: Thu Oct 17 2002 - 13:05:15 GMT-3

• Next message: OhioHondo: "RE: RE: Dialer watch"
• Previous message: Joe Martin: "RE: serial interface up and down"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I'm currenlty working on Darth Reid Lab.
I have a problem with redistribution between R1 (which is runnning OSPF and
RIP) and R2 (which is running RIP).
On R2, I see only the /24 ospf route. It's normal because the subnet between
R1 and R2 is a /24 subnet.

I would like to know how to configure R1 in order to see all the routes (ex
: 133.10.1.0/27, etc) !!

I tried the following on R1 : area 0 range 133.10.1.0/24 not-advertise :
without any success !!

What's now if the route will be 133.10.1.0/23 ?

What do I have to do ?

PS : In the original the redistribution occurs between OSPF and IGRP. I
replaced IGRP by RIP.

• Next message: OhioHondo: "RE: RE: Dialer watch"
• Previous message: Joe Martin: "RE: serial interface up and down"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:49 GMT-3