From: Todd Veillette (tveillette@myeastern.com)
Date: Thu Oct 17 2002 - 08:09:05 GMT-3
I believe frame-relay cir (cir) is used in policing
senarios where as frame-relay traffic rate (cir) (peak)
for shapeing. They are a little different, so I would
say it depends on what you are trying to do:
http://www.cisco.com/warp/public/105/policevsshape.html
-TV
----- Original Message -----
From: "chenyan" <chenyan@deeptht.com.cn>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Wednesday, October 16, 2002 11:22 PM
Subject: frame cir problem again
> hi,all
>
> This is my second question about the "frame-relay cir (cir)" and
"frame-relay traffice-rate (cir) (peak)", what's the difference and in which
condition I can use which one?
>
> It is because that in bootcamp 22, it says"The cir for pvc connecting to
router 14 should be 12kbs", I want to use the "frame-relay cir (cir)" , but
someone tell me I'm supposed to be using "frame-relay traffice-rate (cir)
(peak)".
>
> Thanks
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:49 GMT-3